For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Pole Line Hardware › Service, Secondary & Neutral Hardware › Brackets, Neutral Wire

Brackets, Neutral Wire

Neutral Extension Brackets

Increases spacing between pole and neutral wire. Provides offset between neutral and phase conductors to prevent phase-to-ground contacts during sudden release of accumulated ice. To prevent disassembly due to vibration, insulator is retained with round washer, regular square nut, and selflocking cotter. Use DE4S-series insulator; order separately. Hot-dipped galvanized steel for corrosion resistance.

Catalog Number Offset Extension Accommodates Mounting Bolt Size Approx. Ship Wt. per Each
C2060004 15" 5/8" Upper, 1/2" Lower 8.00 lbs.
DC6N1 13 3/4" 4.50 lbs.

Neutral Wire Fitting

Used where a neutral wire is used as one of a 3-phase circuit. Has 11/16" mounting slots. Non-insulating. Hot dip galvanized steel.

Catalog Number Maximum Wire Size Offset from Pole Face Pole Bearing Surface Length Accommodates Mounting Bolt Size Approx. Ship Wt. per Each
3470 1/2" 1-5/8" 2-1/2" 5/8" 1.24
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Pole Line Hardware