
Home › Products › Pole Line Hardware › Deadend Hardware › Clevises, Thimble Deadend › Pressed Steel Thimble Clevises
Pressed steel type thimble clevises are used in the deadending of electrical conductors. The contour of the clevis body is smooth to distribute load stresses at the attachment point of the wire deadend. The pin end of the clevis is inserted through the eye or tongue of a suspension type insulator. A hump back cotter key is included for quick removal.
| Catalog Number |
Minimum Ultimate Tensile Strength |
Steel Thickness |
Clevis Width |
Clevis Pin Dia. |
Approx. Ship Wt. per Each |
|---|---|---|---|---|---|
| 573 | 7,500 lbs. | 10 Ga. (0.135") | 1" | 5/8" | 0.94 lbs. |
| PSC2070147 | 10,000 lbs. | 9 Ga. (0.149") | 13/16" | 1.00 lbs. |
|
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |
