For sales and support visit:
hubbellpowersystems.com/contact/
hubbellpowersystems.com/contact/
Tool & Rubber Protective Bags & Buckets
Tool Bucket
| (12" dia. x 15" D) - Molded plastic bottom with 21/2-inch tapered molded flange up sides. Top has molded plastic ring, 1/2-inch polypropylene rope handle, standard 4" x 8" inside pocket. |
Tool Bucket
| (7" dia. x 10" D) - For steel tower work, it has a molded plastic top and bottom, with 3/8-inch Chemline rope handle. |
Lineman's Tool Bag
| (22" L x 11" W x 11" D) - Plywood bottom covered inside and out with metal skids on bottom of bag. Has full separating heavy duty zipper, heavy webbing handles, completely around the bag, and full 4-inch pocket on the inside. |
Glove Bag
| (18" L x 8" W) - One piece front and back, bar-tacked at all corners. Leather reinforced inside and out for snap, and double nylon stitched. Gusset has 4-inch top tapering to 2- inch bottom. |
Sleeve Bag
| (27" L x 12" Top - 7" Bottom) - For flat storage of rubber sleeves. Bar-tacked corners, snap fasteners, and double nylon stitching. |
Combination Glove and Sleeve Bag
| (18" L x 8" W) - Separate storage for rubber gloves and sleeves. Single flap, double nylon stitching, reinforced inside and out for snap. |
Line Hose Bag
| (48" L x 7" Dia.) - With 3-inch wide plastic top ring, molded plastic bottom with 2-inch cuff, and 3/8-inch rope handle. |
| Cat. No. | Description | Weights |
|---|---|---|
| C4170144 | Tool Bucket (15" Deep) | 2 lb. 8 oz. |
| C4170146 | Tool Bucket (10" Deep) | 12 oz. |
| C4170147 | Lineman's Tool Bag | 3 lb. |
| C4170148 | Glove Bag | 8 oz. |
| C4170149 | Sleeve Bag | 10 oz. |
| C4170150 | Glove & Sleeve Bag | 10 oz. |
| C4170151 | Line Hose Bag | 2 lb. |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |