hubbellpowersystems.com/contact/
Tool Belts
Sizing
Proper sizing is one of the most important considerations in the purchase of a lineman's tool belt. An improperly sized belt is uncomfortable and may cause an accident or injury.
Bashlin tools belts are measured by the "D" size, which is the distance between the heels of the D-rings.
All linemen's tool belts must be ordered according to the "D" size.
To Find Your "D" Size
- 1. Locate the point where the heel of the "D" ring should rest. As the photo illustrates, this is approximately 4" down from the top of the hip bone.
- 2. Begin to measure from this point. Measure around the buttocks to the same point on the opposite side.
When a properly sized tool belt is worn,the D-rings will point nearly straight ahead and the tongue adjustment will be in the center holes as shown inn Photo 3.
To properly size the Padded Rest-A-Back tool belts, add 2" to your standard "D" measurement.
BELT ADJUSTMENT IN INCHES - PER ASTM F887
| D Size, inches | Minimum, inches | Center Hole | Maximum, inches | Tool Loops |
|---|---|---|---|---|
| D18 | 32 | 36 | 40 | 3 |
| D19 | 33 | 37 | 41 | 3 |
| D20 | 34 | 38 | 42 | 3 |
| D21 | 36 | 40 | 44 | 4 |
| D22 | 37 | 41 | 45 | 4 |
| D23 | 38 | 42 | 46 | 4 |
| D24 | 40 | 44 | 48 | 4 |
| D25 | 41 | 45 | 49 | 4 |
| D26 | 42 | 46 | 50 | 4 |
| D27 | 44 | 48 | 52 | 4 |
| D28 | 45 | 49 | 53 | 4 |
All Lineman's tool belts must be ordered according to "D" size.
Example: PSC60FHD21
See "how-to" and table above for more information.
The Bashlin Deluxe
The Bashlin Deluxe is a field-tested, proven design It is one of the original semi-floating, shifting "D" belts. The shifting "D"s reduce chafing and bumps on the hips. The 5" cushion pad is soft and breaks in easily. The harness leather tool loops and tongue and buckle section are designed for rugged wear.
No. PSC60FHDXX Ship Wt: 6.25 lb (2.83 kg)
The Floridian
Superior design and performance make this belt the industry standard. It combines a padded, contour cushion section with flares for the shifting D-rings and a 51/2" back. This belt gives excellent support and climbing comfort. It is a practical belt with wearable quality which makes it economical.
No. PS88DXX Ship Wt: 6.50 lb (2.95 kg)
Order linemen's belts by "D" size only. See preceding page for how to determine sizes.
The Wrangler
A 5" cushion section, a nylon back, and a 6 ply tongue and buckle section are features of this practical favorite. It is lightweight, with standard comfort features, including Bashlin's S-shaped D-rings and an all leather cushion.
No. PS1511NDXX Ship Wt: 5.25 lb (2.38 kg)
The Nylon Deluxe
A familiar design in a shifting "D" nylon belt. The neoprene impregnated nylon back is light, durable and flexible in extreme temperature ranges. The 5" leather cushion section is comfortable. The tongue and buckle is 6 ply nylon and the tool loops are leather.
No. PS160NDXX Ship Wt: 6.00 lb (2.72 kg)
Rest-A-Back
Bashlin's Back Support Tools Belts help relieve strain and fatigue. Use the chart to determine the proper size.
To properly size the Padded Rest-A-Back tool belts, add 2" to your standard “D” measurement. See Page 2555.
No. PS88BDXX Ship Wt: 8.50 lb (3.83 kg)
| Belt Size | Upper Tongue Adjustment | Belt Size | Upper Tongue Adjustment |
|---|---|---|---|
| D18 | 29-36" | D24 | 35-42" |
| D19 | 30-37" | D25 | 36-43" |
| D20 | 31-38" | D26 | 37-44" |
| D21 | 32-39" | D27 | 38-45" |
| D22 | 33-40" | D28 | 39-46" |
| D23 | 34-41" | D29 | 40-47" |
| D30 | 41-48" |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |