For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Anchoring › Anchor Rods › PISA Anchor Rods, Eyenuts & Couplings

PISA Anchor Rods, Eyenuts & Couplings

All components on this page are hot-dip galvanized per ASTM A153.

EYENUTS Catalog Number
Thimbleye® Std.Pkg/Pallet Twineye® Std. Pkg/Pallet Tripleye® Std. Pkg/Pallet
For 5/8" Dia. Rods 12587* 25/2250 12589 25/1200 12593 25/750
For 3/4" & 1" Dia. Rods 6512* 25/1200 6562 25/1200 12585 25/1200
For 1" Dia. H.S. N/A N/A 6562H 25/1200 12585H 25/1250
Thimbleye nuts, Twineye Nuts, Tripleye Nuts
THIMBLEYE® NUTS A B C D R
For 5/8" Dia. Rods 7/8" 1-7/8" 1-3/8" 1-11/64" 1/4"
For 3/4" & 1 Dia. Rods 1-1/8" 2-25/64" 1-19/32" 1-5/8" 13/32"
TWINEYE® NUTS A B C D R
For 5/8", 3/4" & 1 Dia. Rods 1-13/32" 2-25/64" 1-27/64" 1-1/2" 5/16"
TRIPLEYE® NUTS A B C D R
For 5/8", 3/4" & 1 Dia. Rods 1-3/4" 2-13/16" 1-5/8" 1-1/2" 1/4"
RODS 3-1/2-ft. ROD 7-ft. ROD Ultimate Strength†
Cat. No. Std. Pkg/Pallet Cat. No. Std. Pkg/Pallet
5/8" Dia. 12336P 5/50 12332P* 5/50 16,000 lbs.
3/4" Dia. 12634P 5/50 12632P* 5/50 23,000 lbs.
1" Dia. 12338P 5/50 12334P 1/50 36,000 lbs.
1" Dia. H.S. C1021987 5/50 C1021986 5/50 50,000 lbs.
  • *RUS Accepted. †Ultimate strength ratings apply to properly installed anchors only.
  • Failure to install within 5° of alignment with the guy load will significantly lower strength.
COUPLING Catalog Number Std. Pkg/Pallet
For 5/8" Dia. Rods 12245P 50/1950
For 3/4" & 1" Dia. Rods 12247P 50/2400

NOTE: Couplings are required only when it is necessary to add additional rods of 3-1/2 ft. or 7 ft. to form an extension.

Extension Rod &
Coupling Combinations		 3-1/2 ft. ROD 7 ft. ROD
Cat. No. Std. Pkg/Pallet Cat. No. Std. Pkg/Pallet
5/8" Dia. 12249A 5/50 - -
3/4" Dia. 12250A 5/50 C1022328 5/50
1" Dia. 12251A 5/50 12255A 5/50
PISA® Rod & Eyenut Combinations
Catalog No. Rod, Eyenut
E1020031 5/8" x 3-1/2' Rod & Thimbleye Nut
E1020047 5/8" x 3-1/2' Rod & Tripleye Nut
E1020035 5/8" x 7' Rod & Thimbleye Nut
E1020043 5/8" x 7' Rod & Twineye Nut
E1020051 5/8" x 7' Rod & Tripleye Nut
E1020032 3/4" x 3-1/2' Rod & Thimbleye Nut
E1020040 3/4" x 3-1/2' Rod & Twineye Nut
E1020036 3/4" x 7' Rod & Thimbleye Nut
E1020044 3/4" x 7' Rod & Twineye Nut
E1020052 3/4" x 7' Rod & Tripleye Nut
E1020041 1" x 3-1/2' Rod & Twineye Nut
E1020049 1" x 3-1/2' Rod & Tripleye Nut
E1020037 1" x 7' Rod & Thimbleye Nut
E1020045 1" x 7' Rod & Twineye Nut
E1020053 1" x 7' Rod & Tripleye Nut
PISA Anchor Rods
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Anchoring